Home Security Alarm System RF 433MHz Wireless Sensor Glass Break Shock Vibration Detector

Detection alarm function:When the detector detects the sound of surrounding broken glass,the indicator light is on for 1.5 seconds,and immediately send an alarm signal to the alarm host

Tampering function: There is a tamper button on the back of the detector.When the detector is removed and the tamper button is triggered, the indicator light is on for 2 seconds,and immediately send an alarm signal to the alarm host

Low battery remind: When battery is low, it will send low battery signal to the host, Prompt "XX zone power shortage", to remind the user to replace the battery.

Sensitivity adjuster : there is a sensitivity adjuster on the back of the detector, you can  switch different sensitivities according different installation locations to adapt current environment ( 3 sensitivity adjustments: H-high sensitivity, M-middle sensitivity, L-low sensitivity)

Note: If you get false alarm after installation, please adjust the sensitivity to middle or lower; if you still get false alarm after chosen low sensitivity, change the installation place.

 Install the detector as close as possible to the doors and windows,suggest to install it on the ceiling near to the doors and windows;First, clean the corresponding position installed, tape with double-sided adhesive,and then install the detector slider on the double-sided adhesive,fix the detector to the slider

Note: 1. Do not install it in the places with massive noise and wind

     2. It is not waterproof and can not be installed outdoors