You are here: Home » Products » Alarm Accessories Series » Home Security Kitchen Combustible Gas Detector LPG Gas Leak Detector

loading

Share to:
sharethis sharing button

Home Security Kitchen Combustible Gas Detector LPG Gas Leak Detector

PRODUCTINTRODUCTION
 
The product is a smart combustible gas detector with voice prompt, microprocessor control. Whentrigger the gas detector, it will alarm with build-in siren, send notifications to the wireless alarmsystem. The detector adopt a planar semiconductor sensor which feature is high stability, highsensitivity, and low drift. t keep the place safe from the threats of combustible gas (such as liquefiedpetroleum gas,natural gas, methane, etc.
Availability:
Quantity:
  • KR-GD16

  • KERUI

Specification
item
value
Place of Origin
China
Brand Name
KERUI
Model Number
KR-GD16
Name
Wireless Combustible LPG gas detector alarm 
Alarm method
Light and sound
Application
home kitchen
Battery 
USB-5V/AC220V
Material
ABS+Electronic Board
Alarm Volume
100dB
Warranty
1 Year
Standby current
≤155mA
Working current
<230mA
Product Feature
1. Adopt high reliability planar semiconductor sensor 2. AC220V power supply 3. Processor Intelligent Control 4. Sensor failure automatic detection function 5. When alarming, wirelessly send alarm information to GSM alarm host 6. Designed to facilitate gas inflow detection 7. Can be coded with GSM alarm host 8. Easy to service and clean, low maintenance cost
Product Description
Installation matters
1) First, confirm whether the density of the gas to be detected is lighter or heavier than air. The installation location should
be such that everyone in the room can hear the alarm.
2) Gases heavier than air include: liquefied petroleum gas, etc., installed at a position 0.3-1.0 meters below the ceiling and
within 1.5 meters of the radius of the gas source;
3) Gases that are lighter than air include: natural gas, biogas, etc., which are installed 0.3-1.0 meters above the ground and
within a radius of 1.5 meters from the gas source.
TIP:
(1)It should not be too close to the gas stove, so as not to be baked by the flame of the stove;
(2)It cannot be installed in a place with a lot of oily smoke, lest the oily smoke will block the air intake hole of the product
and cause poor air intake, which will affect the sensing sensitivity;
(3)It cannot be installed in places with large water vapor such as exhaust fans, doors and windows;
(4)Do not install in dusty, dirty or insect-infested places.


Previous: 
Next: 
Product Inquiry

Product Category

Copyright © 2017 KERUI, All Rights Reserved  |  Designed By Hefoweb.cn  |  Site Map/XML